Printronix P5000LJ 参照マニュアル
Paper Out Detection, Disable
179
Paper Out Detection, Disable
ASCII Code ESC 8
Hex Code
1B 38
Dec Code
27 56
Purpose
Enable printing to the end of the paper supply when a paper out
condition is sensed.
condition is sensed.
†
Discussion The printer decodes and ignores this command.
Pass Bit 7 from Host
ASCII Code ESC #
Hex Code
1B 23
Dec Code
27 35
Purpose
Passes bit 7 (the eighth and most significant bit) whether it is 1
or 0, thereby cancelling ESC > and ESC =.
or 0, thereby cancelling ESC > and ESC =.
Discussion This command affects only text and control code data; bit 8 of
graphics data is always passed through.
Printer Select
ASCII Code DC1
Hex Code
11
Dec Code
17
Purpose
Places printer in the selected state.
Discussion The configuration parameter Printer Select must be set to
Enable. Refer to the
User’s Manual for information about this
menu option.
This control code allows the printer to receive and print data from
the host if it was deselected by DC3. If the printer was not
deselected by DC3, this code is ignored.
the host if it was deselected by DC3. If the printer was not
deselected by DC3, this code is ignored.
Printer Deselect
ASCII Code DC3
Hex Code
13
Dec Code
19
Purpose
Places printer in the deselected state.
Discussion The configuration parameter Printer Select must be set to
Enable. Refer to the
User’s Manual for information about this
menu option.
When the printer receives this command it ignores data until a
DC1 (Printer Select) command is received.
DC1 (Printer Select) command is received.