Printronix l7032 参照マニュアル
124
Chapter
2
Command Codes
Passing Hex Values
Purpose
Sends specified hex values to the printer. This command can be
used in Standard or Extended Graphics mode.
used in Standard or Extended Graphics mode.
Mode
Standard or Extended Graphics mode, with or without an
Extended Graphic Command selected
Extended Graphic Command selected
Format
(cc) IHEX,
value
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL con-
figuration.
(SFCC). Enter the specific SFCC for your VGL con-
figuration.
IHEX,
The Pass Hex Values command. Enter IHEX,. (The
comma following the command is required).
comma following the command is required).
value
The hex value to be sent to the printer. Valid values
are hex 00 through FF.
are hex 00 through FF.
Comments
The IHEX command can be used to send graphic and non-
graphic hex data. The difference between the use of the
command is shown in example 1, Standard Graphic mode, and
Example 2, Extended Graphic mode.
graphic hex data. The difference between the use of the
command is shown in example 1, Standard Graphic mode, and
Example 2, Extended Graphic mode.
Example 1
The following example of the command used in the Standard
Graphic mode, prints A through F with C underlined. The hex 08
is the control code for a backspace.
Graphic mode, prints A through F with C underlined. The hex 08
is the control code for a backspace.
NOTE: The "Control Code 08" setting for the Line Printer Plus Emulation
must be set to "Backspace" in order for VGL to recognize the hex
code. Refer to your
code. Refer to your
User's Manual for details.
^PY^-
ABC^IHEX,08_DEF
^PN^-