Printronix l7032 参照マニュアル
140
Chapter
2
Command Codes
Shading
Purpose
Produces alphanumeric characters using a black-shaded
impression.
impression.
Mode
Graphics with an Extended Graphics Command selected
Format
(cc) KH
data (cc)KH (cc)-
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL con-
figuration.
(SFCC). Enter the specific SFCC for your VGL con-
figuration.
KH
The Shading command. Enter KH to turn on the
shading feature.
shading feature.
data
The data characters to print in shaded graphics.
(cc)KH
Following the data, enter the Special Function Con-
trol Code (SFCC) for your VGL configuration and
KH to turn off the shading feature.
trol Code (SFCC) for your VGL configuration and
KH to turn off the shading feature.
(cc)-
Graphics Mode CR. Enter the SFCC for your VGL
configuration immediately followed by - to end the
command sequence.
configuration immediately followed by - to end the
command sequence.
Comments
The KH feature must be turned on and off by command. Any
character data entered between the KH on and off commands is
shaded when printed. Shading commands are input as part of the
data in one of the alphanumeric commands. Reverse printing
(discussed on page 136) can be combined with shading.
character data entered between the KH on and off commands is
shaded when printed. Shading commands are input as part of the
data in one of the alphanumeric commands. Reverse printing
(discussed on page 136) can be combined with shading.
When the shading feature is used, only certain dot positions are
printed (versus every dot position in the normal graphics) which
produces the shaded images. The shading value can be changed
using the Shading Mask command discussed on page 142.
printed (versus every dot position in the normal graphics) which
produces the shaded images. The shading value can be changed
using the Shading Mask command discussed on page 142.
Examples The following sample commands illustrate shading.
^PY^-
^M05,05,000AaBb^KHCcDd^KH^-
^PN^
-