Printronix l7032 参照マニュアル
Tab, Vertical
155
Tab, Vertical
NOTE: The Vertical Tab command is not supported on L7032 printers.
Purpose
Performs a vertical tab (VT, hex 0B) function to advance the
paper to the next vertical tab position when used to terminate a
standard graphics command.
paper to the next vertical tab position when used to terminate a
standard graphics command.
Mode
Graphics with a Standard Graphics Command selected
Format
(cc)+
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
(SFCC). Enter the specific SFCC for your VGL
configuration.
+
The graphics vertical tab mnemonic. Enter +.
Comments
The vertical tab functions as a carriage return only when it is used
to terminate a graphics sequence in an extended graphics
command when Free Format is enabled.
to terminate a graphics sequence in an extended graphics
command when Free Format is enabled.
The vertical tab functions as a line feed:
•
when the vertical tab is not used as a graphics command
or graphics function terminator; and
or graphics function terminator; and
•
when the EVFU is not loaded through the use of form
length or host commands.
length or host commands.
If the EVFU is loaded but channel 12 is not loaded, then the
vertical tab functions as a line feed. If channel 12 of the EVFU is
loaded, the vertical tab skips to channel 12.
vertical tab functions as a line feed. If channel 12 of the EVFU is
loaded, the vertical tab skips to channel 12.
See “Electronic Vertical Format Unit (EVFU)” on page 73 for
more information on EVFU and channel 12.
more information on EVFU and channel 12.