Printronix l7032 参照マニュアル
UPS 11
295
UPS 11
The UPS 11 bar code structure is shown in Figure 27 and described on the
following pages.
following pages.
Figure 27. UPS 11 Structure
Quiet Zone
Both ends of the bar code structure require blank quiet zones. The quiet
zones must be at least 0.25 inches wide and completely blank to ensure
accurate reading of the start/stop codes and to prevent adjacent bar codes
from overlapping. Be sure to provide sufficient space on the form for the quiet
zones.
zones must be at least 0.25 inches wide and completely blank to ensure
accurate reading of the start/stop codes and to prevent adjacent bar codes
from overlapping. Be sure to provide sufficient space on the form for the quiet
zones.
Start/Stop Codes
The start/stop codes identify the leading and trailing end of the bar code. Each
of the UPS 11 subsets uses a unique start code and a common stop code,
both automatically provided by VGL.
of the UPS 11 subsets uses a unique start code and a common stop code,
both automatically provided by VGL.
Data Field
UPS 11 is a special case of Code 128 (page 195). This bar code is restricted
to 10 data characters. The first character must be 0 through 9 or A through Z.
The remaining nine digits must be 0 through 9.
to 10 data characters. The first character must be 0 through 9 or A through Z.
The remaining nine digits must be 0 through 9.
DATA FIELD
QUIET
QUIET START
STOP
LOWER GUARD BAND
CODE
CODE
ZONE
ZONE
OPTIONAL READABLE DATA FIELD
CHECK DIGIT
OPTIONAL
HEIGHT
STARTING
POSITION
DATA
FIELD
QUIET
ZONE
ZONE
QUIET
ZONE
ZONE
START
CODE
STOP
CODE
OPTIONAL
READABLE
DATA
FIELD
CHECK
OPTIONAL
HEIGHT
STARTING
POSITION
DIGIT
GUARD
BAND
LOWER