Printronix l7032 参照マニュアル
Setting Left Margins
379
Setting Left Margins
Using dot values to identify maximum horizontal print positions, the page
boundary parameters of an 8-1/2-inch wide form are 510 columns at
boundary parameters of an 8-1/2-inch wide form are 510 columns at
n/60-inch
horizontally (60 dpi X 8.5 inches). (See Figure 42.) Setting a Left Margin value
repositions the Starting Column 1 position by the degree of offset required.
This offset must be a 0 or a positive value. The following examples explain
how setting the Left Margin affects printed output:
repositions the Starting Column 1 position by the degree of offset required.
This offset must be a 0 or a positive value. The following examples explain
how setting the Left Margin affects printed output:
No Left Margin Setting - When the Left Margin configuration setting is 0 on an
8-1/2-inch form, the Starting Column is 1, and the Ending Column is 510
(Figure 43, A and B, respectively).
8-1/2-inch form, the Starting Column is 1, and the Ending Column is 510
(Figure 43, A and B, respectively).
Positive Left Margin Setting - When the Left Margin setting is 20 on an
8.5-inch form, the left margin is offset by 20 dots, and that 20th dot position
becomes Starting Column 1 in VGL memory (A, Figure 44). This 20 dots also
offsets the Ending Column by 20 dots, thus narrowing the maximum print
width on the form from 510 to 490 dots (B, Figure 44).
8.5-inch form, the left margin is offset by 20 dots, and that 20th dot position
becomes Starting Column 1 in VGL memory (A, Figure 44). This 20 dots also
offsets the Ending Column by 20 dots, thus narrowing the maximum print
width on the form from 510 to 490 dots (B, Figure 44).
Figure 43. Left Margin Example - No Setting
Maximum Character Column
Maximum Horizontal Dot 510
Maximum Horizontal Dot 510
A
B
Maximum Horizontal
Print Area (510 dots)
Print Area (510 dots)