Printronix l7032 参照マニュアル
Fonts, Compressed Print Density
85
^V03,03,0003 X 3^V01,00,000IGP^-
Fonts, Compressed Print Density
Purpose
Defines the horizontal print density in characters per inch (cpi).
Mode
Graphics with an Extended Graphics Command selected
Format
(cc) S
f data (cc)-
(cc)
Represents the Special Function Control Code
(SFCC). Enter the specific SFCC for your VGL
configuration.
(SFCC). Enter the specific SFCC for your VGL
configuration.
S
The Compressed Print Density command. Enter S.
f
Represents the Compressed Print Density font.
Replace
Replace
f with a value ranging from 1 through 9 to
select the compressed print density font as
described in Table 11. Standard print density is 10
cpi. Each character font is .1-inch high. The font
sizes are illustrated in the examples beginning on
page 87.
described in Table 11. Standard print density is 10
cpi. Each character font is .1-inch high. The font
sizes are illustrated in the examples beginning on
page 87.
data
The data characters for printing in the Compressed
Print Density font.
Print Density font.
(cc)-
Graphics Mode CR used as a sequence terminator.
Enter the SFCC for your configuration immediately
followed by - to end the command sequence.
Enter the SFCC for your configuration immediately
followed by - to end the command sequence.
font.ex6