Printronix l7032 ユーザーズマニュアル
6.2.6 Black Edge on One Side of Paper
in Section 4.8 Replacing the OPC
ote:
Because the OPC module may not be the cause of the problem, cover the OPC
rdboard box, a large sheet of paper,
or a large cloth) when you remove it from the printer. The covering protects the
If replacing the OPC module does not fix the problem, reinstall the old OPC module in the
5.
cing
r.
6. Call a serv
6.2.7 White Vertical Line
1.
e that all consumables are installed in the printer.
maintenance & service log. Replace any consumable that has been in use
nger than its expected lifespan. Follow the instructions in Chapter 4, Replacing
he instructions in 5.5 Weekly Cleaning Procedure and 5.6 Monthly
4. Replace the fuser unit by following the instructions in Section 4.11 Replacing the Fuser Unit
If replacing the fuser unit does not fix the problem, reinstall the old fuser unit in the printer.
5. Call a service technician.
1. Make sure that all consumables are installed in the printer.
2. Make sure that all consumables are within their expected lifespan by checking the
information in the maintenance & service log. Replace any consumable that has been in use
longer than its expected lifespan. Follow the instructions in Chapter 4, Replacing
Consumables.
Consumables.
3. Clean the printer. Follow the instructions in 5.5 Weekly Cleaning Procedureand 5.6 Monthly
4. Replace the OPC module by following the instructions
N
module with an opaque covering (such as a ca
OPC module from damage by exposure to light.
printer.
Replace the fuser unit by following the instructions in Section 4.11 Replacing the Fuser Unit
and Exit Rollers.
and Exit Rollers.
If repla
the fuser unit does not fix the problem, reinstall the old fuser unit in the printe
ice technician.
Make sur
2. Make sure that all consumables are within their expected lifespan by checking the
information in the
lo
lo
Consumables.
3. Clean the printer. Follow t
113