Printronix l7032 ユーザーズマニュアル

6.2.11 Black Spots

1. Make sure that all consumables are installed in the printer.

surface may reduce print quality. To

etermine whether rough paper is causing the problem, print on smooth 20 lb. (75 gsm) bond

e th

emove the OPC module and check to see if there are any scratches on the OPC drum.

If there are scratches on the OPC drum, replace the OPC module. Follow the instructions in

ven if there are not any scratches on the OPC drum, there may be a problem with the parts

he OPC module. Follow the

ote:

Because the OPC module may not be the cause of the problem, cover the OPC

cardboard box, a large sheet of paper,

or a large cloth) when you remove it from the printer. The covering protects the

If replacing the OPC module does not fix the problem, reinstall the old OPC module in the

all a service technician.

2. Make sure that all consumables are within their expected lifespan by checking the

information in the maintenance & service log. Replace any consumable that has been in use

longer than its expected lifespan. Follow the instructions in Chapter 4, Replacing
Consumables.

3. Clean the printer. Follow the instructions in 5.5 Weekly Cleaning Procedure and 5.6 Monthly

4. Check the surface of the paper. Paper with a rough

d
and see if the print quality improves.

Replac

e fuser unit by following the instructions in Section 4.11 Replacing the Fuser Unit

If replacing the fuser unit does not fix the problem, reinstall the old fuser unit in the printe

E
inside the OPC module. To check for a problem, replace t
in

module with an opaque covering (such as a

OPC module from damage by exposure to light.

printer.

117