Printronix l7032 ユーザーズマニュアル

.21 Spattered Toner Near Bottom Edge of P

6.2

aper

ure

2. Make sure

ithin their expected lifespan by checking the

information in the maintenance & service log. Replace any consumable that has been in use

. Check whether the fuser cleaning roller is dirty. Follow the instructions in Section 4.7.5

If the fuser cleaning roller is dirty, replace it.

If the prob
cleaning ro

w unit. Follow the instructions in

If replacing the fuser unit does not fix the problem, reinstall the old fuser unit in the printer.

ring (such as a cardboard box, a large sheet of paper,

or a large cloth) when you remove it from the printer. The covering protects the

If replacing the OPC module does not fix the problem, reinstall the old OPC module in the

. Call a service technician.

Make s

that all consumables are installed in the printer.

that all consumables are w

longer than its expected lifespan. Follow the instructions in Chapter 4, Replacing
Consumables.

Clean the printer. Follow the instruc

lem continues after you replace the fuser cleaning roller, reinstall the old fuser

ller.

5. Check the fuser unit for problems by replacing it with a ne

6. There may be scratches or foreign substances on the OPC drum. To check for a problem,

replace the OPC module. Follow the in

Note:

Because the OPC module may not be the cause of the problem, cover the OPC

module with an opaque cove

OPC module from damage by exposure to light.

printer

126