Printronix L5035 サービスマニュアル
Reprinting Pages After Fault Condition
139
If Reprint On Fault Is
Enabled
(The Default):
•
Any pages left in the printer at the time of failure
will be
reprinted. No data is lost.
•
Fanfold paper: the printer reprints all pages that have not
completely exited the printer at the time of failure. The exact
number of pages that are reprinted is determined by the length
of the page and where within the page the fault occurred.
completely exited the printer at the time of failure. The exact
number of pages that are reprinted is determined by the length
of the page and where within the page the fault occurred.
•
Cut sheet paper: the printer determines how many pages did
not exit the printer, and reprints all pages that did not exit.
not exit the printer, and reprints all pages that did not exit.
If Reprint on Fault is
disabled:
•
Any pages left in the printer at the time of failure will not be
reprinted. Data is lost (you will need to reprint the lost pages
according to your application software).
reprinted. Data is lost (you will need to reprint the lost pages
according to your application software).
Whether Reprint on Fault is
enabled or disabled:
•
After a paper jam, you may need to reload the paper onto the
tractors.
tractors.
Table 6, “Error Messages,” on page 143, designates those errors
that require reprinting to recover from an error condition.
that require reprinting to recover from an error condition.
NOTE: Some errors require reprinting, regardless of your printer
configuration. Refer to page 143 for details.
Clearing A Fault When Reprint On Fault Is
Disabled
1.
A fault occurs.
2.
Do what is necessary to correct the fault condition.
3.
Press CLEAR.
4.
The STANDBY LED blinks and the following message appears
while the printer attempts to clear the fault:
while the printer attempts to clear the fault:
•
If the fault is not cleared:
Standby ...
Clearing Fault
Clearing Fault