Printronix L5535 ユーザーズマニュアル
Maintenance Menu
113
Loading Flash Memory
Printer emulation and operating system software are loaded into
flash memory at the factory, but you will install software or files in
the following situations:
flash memory at the factory, but you will install software or files in
the following situations:
•
The customer buys the PGL or VGL graphics, Expansion-CT,
or IPDS option after the printer is installed
or IPDS option after the printer is installed
•
The customer needs to upgrade printer software
•
The customer needs different emulation software
•
You have replaced the controller board
•
You have added or replaced the flash memory card
•
The customer needs to load logos, forms, TIFF files, setup
files, and/or font files to the printer
files, and/or font files to the printer
Emulation software and fonts are supplied on one or more 3.5 inch,
diskettes. Each emulation file is “executable,” which means you can
expand it and copy it into the printer’s flash memory with a single
command. The other kinds of files are not executable; however,
before they can be downloaded, you might need to convert them
into downloadable format. You can then copy them to the printer’s
flash memory as binary data files, as instructed later in this section.
diskettes. Each emulation file is “executable,” which means you can
expand it and copy it into the printer’s flash memory with a single
command. The other kinds of files are not executable; however,
before they can be downloaded, you might need to convert them
into downloadable format. You can then copy them to the printer’s
flash memory as binary data files, as instructed later in this section.
NOTE: The procedures that follow assume that you have some
familiarity with DOS file commands.