Printronix L5535 ユーザーズマニュアル
Chapter 4
Consumables Replacement
152
1.
Prepare a plastic bag in which the developing unit can be
placed and place the developing unit in the plastic bag.
placed and place the developing unit in the plastic bag.
2.
Remove the developing unit from the printer. (See figure
below.)
below.)
3.
If you are replacing the developing unit, dispose of the old unit
properly, and go to step 10. If you are just replacing the
developer, continue with step 4.
properly, and go to step 10. If you are just replacing the
developer, continue with step 4.
IMPORTANT
When replacing developer in an existing developing unit, you
must empty and clean the unit before adding new developer
(every 150,000 pages).
must empty and clean the unit before adding new developer
(every 150,000 pages).
CAUTION
Do not do this procedure unless you have received the
appropriate training. Do not damage the sensors while
cleaning the developing unit. (If damage occurs, contact your
service representative.)
appropriate training. Do not damage the sensors while
cleaning the developing unit. (If damage occurs, contact your
service representative.)
4.
Turn the toner cartridge knob counterclockwise until it stops,
then remove the cartridge from the developing unit.
then remove the cartridge from the developing unit.
Legend:
1)
Toner Cartridge
2)
Toner Cartridge Knob
3)
Cover
4)
Screws (3)
5)
Developing Unit
4
3
5
1
2