Printronix L5535 ユーザーズマニュアル
Chapter 6
System Status And Error Messages
226
Procedure For Fault Clearing - Reprint On Fault
Enabled
1.
A fault occurs.
2.
Correct the fault condition.
3.
Press CLEAR.
4.
The STAND BY LED blinks and the following message appears
while the printer attempts to clear fault:
while the printer attempts to clear fault:
•
If the fault is not cleared:
a.
The printer beeps and briefly displays the following
message:
message:
b.
The printer then redisplays the original fault message, or
any other uncleared fault message.
any other uncleared fault message.
c.
Attempt to clear the fault condition again, or contact your
service representative.
service representative.
•
If the fault is cleared, and if you do
not need to reload the paper
into the tractors (for example, the printer ran out of toner):
a.
The printer goes OFFLINE.
b.
Press ONLINE to resume printing.
•
If the fault is cleared, and if you need to reload paper into
the tractors (such as after a paper jam), the following message
appears:
appears:
a.
Reload the paper onto the tractors.
Clear Paper Path
for Reprint
for Reprint
Standby ...
Clearing Fault
Clearing Fault
Faults Not Cleared