Printronix L5535 ユーザーズマニュアル
Chapter 2
Powering On The Printer
40
Powering On The Printer
Legend:
1)
Power Switch
CAUTION
The printer must be connected to a 220-240 VAC, 30 Amp, 50-
60 Hz power source, as shown on the rear panel label. Using
an incorrect power source may damage the printer.
60 Hz power source, as shown on the rear panel label. Using
an incorrect power source may damage the printer.
1.
Turn on the printer by setting the power switch to | (on).
2.
Note that when you power on the printer, the following occurs:
a.
The printer reads the emulation boot file and displays the
message:
“TESTING HARDWARE
PLEASE WAIT...”
message:
“TESTING HARDWARE
PLEASE WAIT...”
b.
If there are no bootup errors, the LCD displays:
“DIAGNOSTICS PASSED”
“DIAGNOSTICS PASSED”
c.
STAND BY Light Flashes
d.
The ONLINE indicator lights continuously and STAND BY
goes out.
goes out.
1