Printronix P7000 ユーザーズマニュアル
69
NOTE: When a new value is selected, the printer will lose the current print
position. You must reset the top of form to automatically save the new
value.
value.
ZTP Data Time
This option sets the pause time in the data stream that the ZTP requires
before moving the form to the tear bar once a print job is completed. The
values range from .5 to 5 seconds. The default is .5 seconds.
before moving the form to the tear bar once a print job is completed. The
values range from .5 to 5 seconds. The default is .5 seconds.
ZTP Wait Time
This option sets the minimum amount of time that the form stays at the tear
bar. This allows you time to remove the form before the form is retracted to
print the next form. The adjustable values range from 500 to 5000
milliseconds in increments of 500 milliseconds. The default value is 2
seconds.
bar. This allows you time to remove the form before the form is retracted to
print the next form. The adjustable values range from 500 to 5000
milliseconds in increments of 500 milliseconds. The default value is 2
seconds.
ZTP Platen Open
This option allows the user to have the platen open whenever forms are
reversed. Enabled is the default, used for most papers and labels. The feature
can be disabled as required by some multi-part forms.
reversed. Enabled is the default, used for most papers and labels. The feature
can be disabled as required by some multi-part forms.
CONFIG. CONTROL
The CONFIG. CONTROL menu allows you to control your printer’s
configurations according to the specifications necessary for your print jobs.
configurations according to the specifications necessary for your print jobs.
CONFIG.
CONTROL
(from page 59)
Load
Config.
Save
Config.
Print
Config.
Delete
Config.
Power-Up
Config.
Protect
Configs.
Name
Configs
Factory*
1-8
1-8
1*
2-8
2-8
Current Short*
Current Full
Factory
Power-Up
All
1-8
Current Full
Factory
Power-Up
All
1-8
1*
2-8
2-8
Factory*
1-8
1-8
Disable*
Enable
Enable
1-8
* = Factory Default
Reset Cfg
Names
1*
2-8
All
2-8
All
Auto Save
Enable*
Disable
Disable