Printronix SL5000r 参照ガイド
158
Chapter
3
PRINTER CONTROL
Standard Chars.
This menu entry permits you to adjust the thickness or font weight of standard
text fonts.
text fonts.
The factory default is 340 and the range is from 0 to 512.
Bold Chars.
This menu entry permits you to adjust the thickness or font weight of bold text
fonts. This menu will not take effect unless you save it in a configuration and
the printer is powered up with that configuration.
fonts. This menu will not take effect unless you save it in a configuration and
the printer is powered up with that configuration.
The factory default is 448 and the range is from 0 to 512.
Extra Bold Char.
This menu entry permits you to adjust the thickness or font weight of extra
bold text fonts.
bold text fonts.
The factory default is 504 and the range is from 0 to 512.
NOTE: For most applications, the default settings for font memory are
acceptable. Therefore, do not change the defaults unless your
application requires an uncommon memory configuration.
application requires an uncommon memory configuration.
OCR-A Chars.
Character weight adjustment of resident OCR-A characters.
The factory default is 384 and the range is from 0 to 512.
OCR-B Chars.
Character weight adjustment of resident OCR-B characters.
The factory default is 304 and the range is from 0 to 512.
Tall Characters
Increases the point height of resident Intellifont characters.
•
Enable. Increases the point height of resident Intellifont characters
approximately 10%.
approximately 10%.
•
Disable. Standard resident font character point height is maintained.
The factory default is Disable.