Printronix SL5000r 参照ガイド

341

Ribbon Low

Yes

1.

The supply spool is 
getting low.

2.

If there is a large 
amount of ribbon 
still on the supply 
spool, then the 
Ribbon Low 
message is being 
displayed falsely.

1.

Replace ribbon.

2.

Disable Ribbon Low in the 
MEDIA CONTROL menu.

RIBBON OUT
Load Ribbon

Yes

1.

The ribbon supply 
spool is empty.

2.

The ribbon has 
broken.

1.

Replace ribbon.

2.

Reinstall ribbon.

SECURITY CODE 
VIOLATION

Yes

The software being 
used is not correct for 
the printer.

1.

Load the correct software.

2.

Power off the printer for 15 
seconds, then power back 
on again. If the problem 
persists, contact your 
authorized customer 
service representative.

SECURITY 
VIOLATION

Yes

The security key is 
missing.

Install the security key.

SOFTWARE 
ERROR*
Recycle Power

Yes/No

1.

Application 
software tried to 
perform an illegal 
printer function.

2.

There are 
damaged logic 
circuits on the 
controller PCBA.

1.

Recycle the printer power. 
If possible, print a job that 
has previously worked.

2.

If the problem persists, 
contact your authorized 
service representative.

Speed Exceeds
Validator Limit

Yes

The Print Speed or 
Slew Speed value is 
above 6 IPS as the 
power-up default with 
the validator option 
installed, or the user 
attempted to increase 
Print Speed or Slew 
Speed above 6 IPS.

Change the Print Speed or 
Slew Speed value in the 
MEDIA CONTROL menu to 6 
IPS or less when using the 
validator option, and save the 
new value as the power-up 
default.