Printronix SL5000 参照マニュアル
Bottom Margin, Set
127
Bottom Margin, Set
ASCII Code ESC N
n
Hex Code
1B 4E
n
Dec Code
27 78
n
Purpose
Selects the number of lines (at the current line spacing) for the
paper skip at the bottom of the perforated page.
paper skip at the bottom of the perforated page.
where:
n = 1 through 255 (hex 01 through hex FF) to select the number
of lines to skip. If the value of
of lines to skip. If the value of
n exceeds the current forms
length, it is ignored.
Comment
The actual distance set is the product of
n and the current line
spacing. Factory default value disables bottom margin. The
current default value may be set by the operator. Setting a new
forms length (ESC C) resets the bottom margin to zero.
current default value may be set by the operator. Setting a new
forms length (ESC C) resets the bottom margin to zero.
If the distance set is equal or greater than the form length,
printing is only allowed on the top line of each page.
printing is only allowed on the top line of each page.
This feature is disabled whenever vertical tabs are set.
Bottom margin can also be selected from the control panel;
however, vertical tabs within the bottom margin zone, as set by
the control panel, are ignored. The control code bottom margin
setting from the host computer overrides the control panel
setting.
however, vertical tabs within the bottom margin zone, as set by
the control panel, are ignored. The control code bottom margin
setting from the host computer overrides the control panel
setting.
Bottom Margin Cancel
ASCII Code ESC O (alpha O)
Hex Code
1B 4F
Dec Code
27 79
Purpose
Resets bottom margin to zero.