Printronix SL5000 参照マニュアル
Printer Deselect
191
Printer Deselect
ASCII Code DC3
Hex Code
13
Dec Code
19
Purpose
Places printer in the deselected state.
Comment
The configuration parameter Printer Select must be set to
Enable. Refer to the
Enable. Refer to the
User's Manual for information about this
menu option.
When the printer receives this command it ignores data until a
DC1 (Printer Select) command is received.
DC1 (Printer Select) command is received.
Printer Select
ASCII Code DC1
Hex Code
11
Dec Code
17
Purpose
Places printer in the selected state.
Comment
The configuration parameter Printer Select must be set to
Enable. Refer to the
Enable. Refer to the
User's Manual for information about this
menu option.
This control code allows the printer to receive and print data from
the host if it was deselected by DC3. If the printer was not
deselected by DC3, this code is ignored.
the host if it was deselected by DC3. If the printer was not
deselected by DC3, this code is ignored.
Reassign Graphics Mode
ASCII Code ESC ?
s m
Hex Code
1B 3F
s m
Dec Code
27 63
s m
Purpose
Changes one graphics mode to another.
where:
s is a character K, L, Y, or Z, which causes graphics mode to
change to mode
change to mode
m (0-7) (see Table 43 on page 192).
Comment
Sending data to the bit image command makes the data print
according to the graphics mode you select with
according to the graphics mode you select with
m.