Printronix SL5000 参照マニュアル
94
Chapter
4
Configuring the Serial Matrix Emulation with Control Codes
Condensed Print
ASCII Code SI
ESC SI
Hex Code
0F
1B 0F
Dec Code
15 27
15
Purpose
Selects 17 characters per inch (cpi) condensed print format.
Comment
Condensed print can also be selected using control code ESC X.
See “Print Mode/Pitch Selection” on page 108.
See “Print Mode/Pitch Selection” on page 108.
The Serial Matrix condensed print control code SI affects all
subsequent characters. After receiving code SI, all characters
are printed in condensed print until reset by ESC M, ESC P, the
condensed print reset control code DC2, printer reset, or a new
print mode control code. The Serial Matrix SI code (hex 0F) is
equivalent to the ESC SI code. If condensed print is not allowed
in the current print mode, the code is ignored.
subsequent characters. After receiving code SI, all characters
are printed in condensed print until reset by ESC M, ESC P, the
condensed print reset control code DC2, printer reset, or a new
print mode control code. The Serial Matrix SI code (hex 0F) is
equivalent to the ESC SI code. If condensed print is not allowed
in the current print mode, the code is ignored.
Example
The following sample illustrates condensed character printing
and reset.
and reset.
Condensed Print Reset
ASCII Code DC2
Hex Code
12
Dec Code
18
Purpose
Resets condensed character printing to 10 cpi.
Comment
The condensed print reset control code selects 10 cpi character
pitch. Other print attributes are not affected.
pitch. Other print attributes are not affected.
Other control code sequences which cancel condensed print are
ESC M, ESC P, ESC @, or a new print mode control code.
ESC M, ESC P, ESC @, or a new print mode control code.
Delete
ASCII Code DEL
Hex Code
7F
Dec Code
127
Purpose
Deletes the previously received character on a line.
Comment
Characters that have been truncated due to line length
restrictions are not affected by this code.
restrictions are not affected by this code.