Printronix SL5000 参照マニュアル
98
Chapter
4
Configuring the Serial Matrix Emulation with Control Codes
Expanded (Double Wide) Print
ASCII Code ESC W
n
Hex Code
1B 57
n
Dec Code
27 87
n
Purpose
Selects or resets expanded (double wide) print.
where:
n = 1 selects expanded print (hex 01 or hex 31)
n = 0 resets expanded print (hex 00 or hex 30)
n = 0 resets expanded print (hex 00 or hex 30)
Comment
When expanded print using ESC W is received, all characters
are printed double wide until reset by the Expanded Print Reset
control code, Emulation Reset, or DC4.
are printed double wide until reset by the Expanded Print Reset
control code, Emulation Reset, or DC4.
Also refer to control code SO and ESC SO, Expanded (Double
Wide) Print for one line only.
Wide) Print for one line only.
Example
The following sample illustrates expanded character printing and
expanded character printing reset.
expanded character printing reset.
Expanded (Double Wide) Print (One Line Only)
ASCII Code SO
ESC SO
Hex Code
0E
1B 0E
Dec Code
14
27 14
Purpose
Selects expanded (double wide) print for one line only.
Comment
This expanded print control code is a line-by-line print attribute;
when the SO or ESC SO control code is received, the current
line is printed double wide and automatically reset.
when the SO or ESC SO control code is received, the current
line is printed double wide and automatically reset.
This control code can be reset by a paper motion control code
(LF, VT, CR, etc.), by the DC4 (double wide cancel) code, ESC
@ (Emulation Reset), CAN or ESC W (double wide print). When
set by SO, double wide print is not cancelled by the Autowrap
feature.
(LF, VT, CR, etc.), by the DC4 (double wide cancel) code, ESC
@ (Emulation Reset), CAN or ESC W (double wide print). When
set by SO, double wide print is not cancelled by the Autowrap
feature.