Toshiba bdx4150 ユーザーズマニュアル

*  Do not expose the remote sensor of the Blu-ray Disc™ 

player to a strong light source such as direct sunlight 
or other illumination. If you do so, you may not be able 
to  operate  the  Blu-ray  Disc™  player  via  the  remote 
control.

Notes:
•  Direct  the  remote  control  at  the  remote  sensor  of  the 

Blu-ray Disc™ player.

•  When  using  the  remote  control,  press  the  buttons  at 

intervals of about 1 second to ensure the correct mode 
of operation.

•  Do not drop or give the remote control a shock.

•  Do not leave the remote control near an extremely hot 

or humid place.

•  Do  not  spill  water  or  put  anything  wet  on  the  remote 

control.

•  Do not open the remote control.

•  If the remote control is not going to be used for a long 

time,  remove  the  battery  to  avoid  damage  caused  by 
battery leakage corrosion.

HDMI Cable

(not included)

This connection provides better picture quality and supports up to 1080i/1080p, 1080p/24F resolution.

Connect a HDMI cable from the HDMI output jack on this product to the HDMI input jack on the TV. 

POWER

Distance: About 5 m from the front of the remote 
sensor.

Angle:
About  30°  in  each  direction  of  the  front  of  the 
remote sensor. 

To enjoy the viewing of 3D content, an HDMI connection with High Speed HDMI cable is required.

• 

HDMI connection is required. Cables are not included. Analog connection is not supported.

• 

Do  not  tilt  the  connector  when  inserting  it  into  the  HDMI  jack,  and  make  sure  the  shapes  of  the  jack  and  the 

• 

connector are matched.
When using a non-HDCP compatible TV, the image will not display properly.

• 

An HDMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an 

• 

additional audio connection if you are using an HDMI cable.