Toshiba hd-a20kc オーナーマニュアル

Chapter

Connections

AV amplifier

Optical digital cable
(not supplied)

Digital input

Optical

Connecting to an audio system

Caution

When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not

have Dolby Digital, DTS or MPEG decoding capability, be sure to set “Digital Out SPDIF” (

page 53) to “PCM”.

Otherwise, high volume sound may damage your hearing as well as the speakers.

Note about audio capabilities

Dolby Digital Plus and DTS-HD (DTS core only) capability limited to 5.1 channels.
DTS-HD processing of DTS core only. Full DTS-HD is not supported.

Via HDMI output

Caution

When you are connecting (via the HDMI OUTPUT jack) an AV decoder that does not have Dolby Digital or DTS

decoding capability, be sure to set “Digital Out HDMI” (

page 53) to “PCM” or “Downmixed PCM”. Otherwise, high

volume sound may damage your hearing as well as the speakers.

You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI output of your player
to an AV receiver with an HDMI audio input. You can listen to down-converted Dolby Digital Plus and Dolby
TrueHD as well as Dolby Digital and DTS using a receiver with Dolby Digital and DTS decoding capabilities and
an optical digital input.

Via optical digital audio output

HDMI compatible device

HDMI cable
(not supplied)

You may need to adjust the HDMI

audio output to match the

capabilities of your AV amplifier.

In this case, set “Digital Out

HDMI” ( page 53) to “PCM”.

AV amplifier

HDMI input

HDMI output

HDMI input

Make the connection as below, and set “Digital Out HDMI” (

page 53).

Make the connection as below, and set “Digital Out SPDIF” (

page 53).

HD-A20KU/KC_02_E 24

07.3.2 1:11:32 PM