Toshiba hd-a2ku ユーザーガイド

3

Chapter

3

When the power turns on, ON/STANDBY 

indicator on the front panel changes color from 

red (standby mode) to blue (operation).

Start up (and disc loading (see below)) may 

take time. 

The power turns off and ON/STANDBY indicator 

on the front panel turns red (standby mode).

  Use the button on the front panel or the remote control 

to open and close the disc tray. Do not push or hold 
the disc tray while it is moving. Doing so may cause 
the player to malfunction.

  Do not load a disc which is unplayable, or any object 

other than a playable disc.

  Do not apply downforce to the disc tray. Doing so may 

cause the player to malfunction.

  If the disc tray stops while closing, the mechanical 

protection system of this player will open it. Do not 
force it to close. Doing so may damage the disc tray.

  If the disc tray will not open, turn the player off, and 

press OPEN/CLOSE on the front panel. This may turn 
the player on and open the disc tray. If it still won’t 
open, contact TOSHIBA Customer Support.

The player opens the disc tray.

When using a 

double-sided disc, 

turn the label of the 

playing side up.

After placing a disc, press OPEN/CLOSE.

  When you power on this player for the fi rst time, the 

setting screen will appear. Please refer to 

 page 

50 and select “General” > “Clock Set”. Check the 

date and time are set properly and correct them if 

necessary. When complete, press SETUP to exit. Your 

player is ready.

  If the player freezes for about 15 minutes or more 

and will not respond to any buttons, holding down 

ON/STANDBY button on the front panel for about 10 

seconds can force the player to turn off. However, this 

is an emergency measure, which may cause damage 

to the player. Avoid casual use of this measure.

HD-A2_03_E   30

HD-A2_03_E   30

07.1.4   4:36:23 PM

07.1.4   4:36:23 PM