Toshiba rd-xs55 ユーザーズマニュアル

Default Gateway

DNS, DNS Server

Proxy Server

Proxy Port

MAC Address

Connection Check*

Note
• Please contact the router manufacturer when the router DHCP feature is not operating properly (in such a case, an error

will occur since the default gateway and the DNS server IP address cannot be obtained).

(Setting unnecessary)

Auto

Manual

Up to 63 single-byte
alphanumeric characters or
symbols

80

(Unable to set)

The default gateway that is obtained from the DHCP server is
displayed.

When “Use” is selected, the DNS server address is automatically
obtained from the DHCP server.

Manually enter the DNS server address.

Enter the proxy server address when your provider requires proxy
setting.

Normally there is no need to change this setting.
When required, change the value to a number between 1 and 65535.

The MAC address that is established for each recorder is displayed.
It cannot be changed.

This checks the connection between the recorder and the router.

* When “Connection Check” is pressed, items that were changed on the “Address/Proxy” and “Mail Setting” screens will be

saved, and you will not be able to return to the previous setting. Keeping a record of the setting is recommended as a
precaution.

Mail Function

Mail Keyword

POP3 Server Address

POP3 User Name

POP3 Password

APOP

Accept

From

Completion Notice

SMTP Server Address

Sender Address

Secondary Address

Disable

Enable

e.g.: rdstyle

e.g.: XXX.XXX.com

Enable

Disable

Only

All

e.g.:
XXXXX@XXX.XXX.com

Disable

Secondary Address

Return to sender

Secondary Address and
sender

e.g.: XXX.XXX.com

e.g.:
XXXXXXX@XXX.XXX.com

e.g.:
XXXXXXX@XXX.XXX.com

This will disable the use of the mail function.

This will enable the use of the mail function.

This sets 6-20 single-byte alphanumeric characters so that the email
for the mail function can be recognized. Symbols should not be
used since they will cause error and timer recording setting by email
will not be successful.

This sets the POP3 server address. (Enter up to 63 single-byte
alphanumeric characters.)

This sets the username for accessing the POP3 server. Enter up to
63 single-byte alphanumeric characters.

This sets the password for accessing the POP3 server. Enter up to
16 single-byte alphanumeric characters.

This enables the use of APOP (Authenticated POP*).

This disables the use of APOP (Authenticated POP*).

Only one email address is set as the sender.

No specific email address is set as the sender.

When “Accept” is set to “Only”, enter the email address of the
sender up to 63 single-byte alphanumeric characters.

Email notification is not sent when timer recording setting by email is
completed.

When timer recording setting by email is completed, notice is sent to
the completion-notice contact address.

When timer recording setting by email is completed, notice is sent to
the email sender’s address.

When timer recording setting by email function is completed, notice
is sent to both completion-notice contact address and the email
sender’s address.

This sets the SMTP server address.**
Enter up to 63 single-byte alphanumeric characters.

This sets the email address of your internet provider’s email service.
Enter up to 63 single-byte alphanumeric characters.

This sets the email address for sending notice when timer recording
setting by email is completed. Enter up to 63 single-byte
alphanumeric characters.

• Depending on the recorder’s operating mode, the timer recording setting may not be successful.
*

APOP: Password encrypting POP. For details, consult your ISP.

** The address of “POP3 Server Address” will be copied if you leave here blank.

RD-XS55SU_Ope_E_p141-170

06.3.20, 4:16 PM

149