Toshiba rs-tx20 ユーザーガイド

117

C o n n e c t i n g t o a H o m e N e t w o r k U s i n g a W i r e l e s s N e t w o r k A d a p t e r

Connecting to a Home Network Using a
Wireless Network Adapter

Use this example if you have a home network that includes a wireless access point (WAP)
or wireless router, or for each DMS in a wireless peer-to-peer network. You can leave
your DMS plugged in while you connect a network adapter.

To connect a wireless network adapter to your DMS:

1. Connect to the adapter. If it is not already attached, connect one end of the USB

cable that came with your wireless network adapter to the port located on the back of
the adapter.

2. Connect to the DMS. Connect the other end of the USB cable to the USB port on the

DMS. The power light on the wireless adapter may come on before the cable is
completely inserted into the USB slot. Make sure you push the cable all the way into
the USB slot.

Do not use the CDs that are included

with your network adapters to set

up your DMS. These CDs are intended to

load drivers and network adapter software

on your personal computer.

The cable may already be attached

to your wireless network adapter.