Toshiba sd-3805 オーナーマニュアル

13

You can install your own Personal Preferences.

11

Press SETUP.
The setup menu appears.

2

2

Press 3

3/4

4 to select the desired item.

The screen will display the current setting for the
selected item, as well as alternate setting(s).

3

3

While the desired item is displayed, press 2

2,

then 3

3/4

4 to select the desired setting.

4

4

Press ENTER to confirm your selection.
Some items require additional steps.

5

5

Select a language for the disc’s Menu, Audio and
Subtitle.

Original : The original language included on the disc is select-
ed.
Other : To select another language, enter the 4-digit number
corresponding to the language code list on page 25. If you
enter the wrong language code, press CLEAR.

Select a language for the setup menu. This is the menu
you see when you press SETUP.

4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Panscan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both side of the original picture may be cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.

Progressive Scan Video provides the highest resolution
pictures with less flicker and line structure.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for 
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.

– Progressive Scan is available only when the VIDEO

OUTPUT switch on the rear panel is set to COMPO-
NENT/PROGRESSIVE SCAN.

Once the setting for progressive scan output is entered, an
image will only be visible on a progressive scan compatible
TV or monitor. If you set Progressive Scan to On in error,
you must reset the unit. Pointing the remote at the player,
press the STOP key to stop any disc that is playing. Next,
press the STOP key again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on
a conventional analog TV or monitor.