Toshiba sd-k1000 ユーザーガイド

Function setup

The video output of the DVD player can be selected as 
Component, P-Scan or HDMI.

Component: Select if you connect the DVD player to your 

TV which has component video inputs. 

P-Scan:  

Select if you connect the DVD player to your 
TV which has component video inputs that 
support progressive scan.

HDMI: High 

Defi nition Multimedia Interface. Select if 

you connect the DVD player to TV via HDMI 
input.

Night mode is equivalent to Dynamic Range Compress. 
When it is On, it reduces the variations between loud and 
soft sounds in audio output. You can still hear softer sounds 
and dialog even in very low volume.

Note
Night mode is Dynamic Range Control (DRC) option for 
analog audio output.

Selects the output sound format corresponding to your 
system connection.

Off: 

To disable Digital out.

Raw:  Disc audio raw data will be output. Select “Raw” if 

your amplifi er supports “DTS”.

PCM: Select when connected to a Multi-channel digital 

stereo amplifi er. The DVD player outputs sound in the 
PCM stereo format when you play a DVD recorded 
on the Dolby Digital, MPEG1 or MPEG2 recording 
system.

You can set the HDMI Res. (Resolution) to be Auto, 480p, 
720p, 1080i or 1080p according to the connected TV.

To set the JPEG Interval for slide show playback. Select 
“Off” to disable the slide show feature.

5 seconds:  Plays back images in the form of a slide show 

at 5 seconds interval.

10 seconds: Plays back images in the form of a slide show 

at 10 seconds interval.

15 seconds: Plays back images in the form of a slide show 

at 15 seconds interval.

1.  Press SETUP during stop.
2. Press   button to select Audio.
3. Press   /   button to select the setting item: Digital out 

or Night Mode.

4. Press   button, then use   /   button to select the 

setting choice on the right.

5.  Press ENTER button.
6.  Press SETUP button to exit the menu.

Notes
•  Select the HDMI resolution according to the performance 

of the connected TV.

•  If the Video out is not set to “HDMI”, you cannot select 

the “HDMI Res.”.

Press   /   button to select the Password option, then press 

 button

. Enter your 4-digit security code and then press the 

ENTER button.

The Parental lock 
is active.

The Parental lock is 
NOT active.

1.  Press SETUP during stop.
2. 

Press   button to select Rating.

3. Press   /   button to select the setting option: Password or 

Rating.

Note
For the HDMI output, please connect the unit to your TV 
via HDMI cable 

.