Toshiba 4000 ユーザーガイド
118
Power Management
Using Standby
Using Standby
used it for a specified amount of time. You can set the
System standby time on the Power Save Mode tab.
System standby time on the Power Save Mode tab.
5
Click Override all Modes with settings here.
6
In the Set to range dialog box, do one of the following:
Click AC only for the settings to apply only when you are
using battery power.
using battery power.
Click All for the settings to apply whether you are using
battery power or outlet power.
battery power or outlet power.
7
Click OK.
8
Click OK again, then close the Control Panel.
Starting again from Standby
To start up the computer from Standby mode, press the power
button until the on/off light changes to green. The computer
returns to the screen you were using.
button until the on/off light changes to green. The computer
returns to the screen you were using.
If you put the computer in Standby mode by closing the display
panel, you can start it again by opening the display panel.
panel, you can start it again by opening the display panel.
NOTE: If you power down using the Standby command and
the battery discharges fully, your information will be lost. Be
sure to save your work often.
the battery discharges fully, your information will be lost. Be
sure to save your work often.
Quickly changing your Shut down mode
You can quickly and easily change your Shut down mode by using
a hot key.
a hot key.
To change your Shut down mode:
1
Press
Fn
and
F3
simultaneously to display the Shut down mode
pop-up window.