Toshiba 4000 ユーザーガイド
210
If Something Goes Wrong
Resolving a hardware conflict
Resolving a hardware conflict
Hot swapping (removing one PC Card and inserting another
without turning the computer off) fails.
without turning the computer off) fails.
Follow this procedure before you remove a PC Card:
1
Click the PC Card icon on the taskbar.
2
Click Stop xxxx, where xxxx is the identifier for your PC
Card.
Card.
The Microsoft
®
Windows
®
operating system displays a
message saying you may safely remove the card.
3
Remove the card from the slot.
There is still a yellow exclamation point
(
)
over the
PCMCIA controller icon in Device Manager.
You’ve installed the PC Card as described in
, but the system still reports the controller with a
yellow exclamation point (
).
The PCMCIA.INI file may not be installed on your computer.
Install it, referring to the Toshiba Configuration Builder CD
Instructions for the installation procedure.
Install it, referring to the Toshiba Configuration Builder CD
Instructions for the installation procedure.
A PC Card error occurs.
Reinsert the card to make sure it is properly connected.
If the card is attached to an external device, check that the
connection is secure.
connection is secure.
Refer to the card’s documentation, which should contain a
troubleshooting section.
troubleshooting section.
Printer problems
This section lists some of the most common printer problems.