Toshiba 4000 ユーザーガイド
52
Connecting Other External Devices
Using external display devices
Using external display devices
Directing the display output when you turn on the computer
Once you’ve connected an external display device, you can choose
to use the internal display only, the external device only, or both
simultaneously. The quickest way to change the display output
settings is to use the display hot key (
to use the internal display only, the external device only, or both
simultaneously. The quickest way to change the display output
settings is to use the display hot key (
Fn
+
F5
):
1
Press
Fn
and
F5
simultaneously.
2
While holding down
Fn
, press
F5
repeatedly until the setting
you want takes effect.
This hot key cycles through the settings in the following
order:
order:
Built-in display panel only
Built-in display panel and external monitor
simultaneously
simultaneously
External monitor only
Built-in display panel and external video device
simultaneously
simultaneously
Other external video device only
3
Release the
Fn
key.
TECHNICAL NOTE: You can also change these settings
using the Display Properties Box.
using the Display Properties Box.
Adjusting the quality of the external display
To obtain the best picture quality from your external display
device, you may need to adjust the video settings. See the
device, you may need to adjust the video settings. See the