Toshiba M750 ユーザーガイド

72

The function of the secondary (right-hand) button depends on the 
program you are using. It usually corresponds to the right mouse 
button (“right-clicking”). Check your program’s documentation to 
determine whether it uses the right mouse button.

The TouchPad

™

 is enabled by default. To change the enable/disable 

TouchPad setting, press 

Fn

 + 

F9

. This hot key enables/disables the 

TouchPad. For more information, see 

.

Your computer comes with a built-in display, but you can also 
connect an external monitor or projector via the RGB (monitor) port.

Before connecting an external monitor or video projector, configure 
your computer for the type of device you are connecting. To do this, 
refer to the documentation for your operating system and devices.

You can easily attach an external monitor or projector to your 
computer if you need a larger screen. To do this:

Read the directions that came with the monitor to see if you 
first need to install new software.

Connect the monitor’s video cable to the RGB (monitor) port 
on the side of the computer.

Connect the device’s power cable to a live electrical outlet.

Turn on the external device.

Your computer will automatically detect the external display 
device and activate a screen with display options.

Select the settings you desire and click Apply.

Click OK.

In the future you can change the display settings by pressing 

Fn+F5

, 

or by configuring the display properties settings.

NOTE