Toshiba M30 ユーザーガイド

ページ / 209
 
Operating Basics 
Satellite M30 Series 
  4-25 
Satellite M30 Series
Version   
1
  Last Saved on 10.09.2003 13:55
ENGLISH using  Mies10 Online.dot –– Printed on 10.09.2003 as  
Wireless LAN 
The Wireless LAN is compatible with other LAN systems based on Direct 
Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing 
radio technology that complies with IEEE802.11 Wireless LAN standard 
(Revision A, B or G) and Turbo Mode.  
Supported features 
It supports the following features: 
■ 
Automatic Transmit Rate Select mechanism in the transmit range of 
54, 48, 36, 24, 18, 12, 9 and 6 Mbit/s. (Revision A and G, Revision 
A/B, B/G, A/B/G combo type) 
■ 
Automatic Transmit Rate Select mechanism in the transmit range of 
11, 5.5, 2 and 1 Mbit/s. (Revision B) 
■ 
Automatic Transmit Rate Select mechanism in the transmit range of 
108, 96.72, 48, 36, 24, 18 and 12 Mbit/s. (Turbo Mode, Revision 
A/B/G combo type) 
■ 
Frequency Channel Selection (Revision A/Turbo Mode: 5 GHz, 
Revision B/G: 2.4 GHz)
 
■ 
Roaming over multiple channels 
■ 
Card Power Management 
■ 
Wired Equivalent Privacy (WEP) data encryption, based on the 152 bit 
encryption algorithm. (Revision B/G, A/B/G combo type) Wired 
Equivalent Privacy (WEP) data encryption, based on the 128 bit 
encryption algorithm. (Revision B, A/B combo type) 
■ 
Advanced Encryption Standard (AES) data encryption, based on 
256 bit encryption algorithm. (Revision B/G, A/B/G combo type) 
 
Wake-up on LAN does not function on a Wireless LAN. 
Security 
■ 
Be sure to enable the WEP (encryption) function to prevent 
unauthorized access to your Wireless LAN. Such access can enable 
illegal intrusion into data, eavesdropping and loss or destruction of 
data. TOSHIBA strongly recommends that you enable the WEP 
function. 
■ 
TOSHIBA is not liable for damage resulting from unauthorized access 
to a Wireless LAN including, but not limited to, illegal intrusion, 
eavesdropping and loss or destruction of data. 
Wireless communication switch 
You can enable or disable the Wireless LAN function, with the on/off 
switch. No transmissions are sent or received when the switch is off. 
Slide the switch toward the back of the computer to turn it on and toward 
the front of the computer to turn it off.