Toshiba S2 ユーザーガイド
79
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
If you are connecting an SVGA monitor, skip to
Selecting video cables
To connect a device to the s-video port, you’ll need to
purchase a s-video cable. For the best video quality, always
use a properly shielded cable.
purchase a s-video cable. For the best video quality, always
use a properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
20 feet (approximately 6 meters).
Using a poor quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
picture, poor color, ghosting, video noise, or loss of video.
Connecting to the s-video port
Video cables are not included with your computer. To connect
a device to the s-video port, you’ll need to purchase a s-video
video cable.
a device to the s-video port, you’ll need to purchase a s-video
video cable.
1
Connect one end of the video cable to the external video
device.
device.
Refer to the documentation provided with the device for the
location of its video-in port.
location of its video-in port.
2
Connect the other end of the video cable to the s-video
port on the left side of the computer.
port on the left side of the computer.
3
Turn on the external video device.
4
Set the display mode by pressing
Fn + F5
, or by setting the
Display Properties settings. For more information, see
.
NOTE