Toshiba SD7300 ユーザーガイド

Basic playback

The DVD player turns on.

The disc tray opens.

With the playback 
side down

• There are two different disc sizes. Place the disc in 

the correct guide on the disc tray. If the disc is out 
of the guide, it may damage the disc and cause the 
DVD player to malfunction.

• Do not place a disc which is unplayable in this DVD 

player.

Playback starts.

Notes
•  Do not move the DVD player during playback. Doing so may 

damage the disc.

• Use the OPEN/CLOSE button to open and close the disc 

tray. Do not push the disc tray while it is moving. Doing so 
may cause the DVD player to malfunction.

•  Do not push up on the disc tray or put any objects other than 

discs on the disc tray. Doing so may cause the DVD player 
to malfunction.

•  In many instances, a menu screen will appear after playback 

of a movie is completed.  Prolonged display of an on-screen 
menu may damage your television set, permanently etching 
that image onto its screen. To avoid this, be sure to press 
the STOP button on your remote control once the movie is 
completed.

This section shows you the basics on how to play a disc.

CAUTION
Keep your fi ngers well clear of the disc tray as it is closing. 
Neglecting to do so may cause serious personal injury.

Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected to 

the DVD player.

Notes
• If the disc tray is holding a disc you have already played, 

playback will begin from the location where you last 
stopped. 

• Some video CD are recorded with PBC (Playback Control), 

a menu with recorded contents may appear on the TV if 
you have turned the PBC on. You can make your selection 
according to its PBC menu. Press the PBC button on the 
remote control to turn PBC on or off anytime during Video 
CD playback. When switching from PBC off to PBC on mode, 
playback will start from the beginning of the disc. To turn on 
the menu display again, press the RETURN button.

 To pause playback (still mode)

Press PAUSE/STEP during playback.

To resume normal playback, press the 
PLAY button.
• The sound is muted during still 

mode.

 To stop playback

Press STOP.

 To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray 
opens completely.

 To start playback in the stop mode

Press PLAY.

Be sure to press the OPEN/CLOSE 
button to close the disc tray after you 
remove the disc.

 

If the DVD player is stopped, or the screen saver is 
engaged for approximately 20 minutes, the DVD player 
will automatically turn itself off. 

If you insert a DVD that contains a top menu, a 
menu may appear. Use 

 /   /   /   

 to select the 

title you want to view, then press ENTER to start 
playback.

• You may need to press the TOP MENU or MENU 

button to display disc menu (depending on the actual 
DVD.) 

 To turn the power off

Press ON/STANDBY button to turn the unit off.