Toshiba SD7300 ユーザーガイド

Others

Check the following guide for the possible cause of a problem before contacting service.

No power.

•  The power plug is disconnected.

•  Connect the power plug securely into the wall outlet.

The DVD player turned off 
by itself.

• The automatic power off function turned the 

unit off.

•  Press the PLAY button.

No picture or abnormal color 
(pinkish, greenish, etc.).

• The TV is not set to receive DVD signal 

output.

•  Select the appropriate video input mode on the TV 

so the picture from the DVD player appears on the 
TV screen.

• The video/HDMI cable is not connected 

securely.

•  Connect the video/HDMI cable securely into the 

appropriate jacks.

•  Mismatch setting between TV and this unit.

•  Select the correct Video out setting.

•  Wrong connection.

•  Check the connection.

• 

PROGRESSIVE button is pressed on a TV 

equipped with component video input jacks 
but does not support progressive scan.

• 

Toggle PROGRESSIVE button to turn off 

progressive mode.

No sound.

•  The equipment connected with the audio cable 

is not set to receive DVD signal output.

•  Select the correct input mode of the audio receiver 

so you can listen to the sound from the DVD player.

•  The audio cable is not connected securely.

•  Connect the audio cable securely into the 

appropriate jacks.

•  The audio receiver or TV is turned off.

•  Turn on the equipment connected with the audio 

cable.

• The setting of output sound for mat is  

incorrect.

•  Select the proper audio setting.

The playback picture has oc-
casional distortion.

•  The disc is dirty.

•  Remove the disc and clean it.

•  It is in fast forward or fast reverse playback.

•  Sometimes  a  small  amount  of  picture  distortion 

may appear. This is not a malfunction.

Brightness is unstable or 
noises are present in the 
playback pictures.

•  The effect of copy protection.

•  Connect the DVD player directly to the TV.  Avoid 

connecting the DVD player to a VCR or TV/VCR 
combination.

The DVD player does not 
start playback.

•  No disc is inserted.

•  Insert a disc.

•  An unplayable disc is inserted.

•  Insert a playable disc. (Check the disc type and 

color system.)

•  The disc is placed upside down.

•  Place the disc with the playback side down.

•  The disc is not placed within the guide.

•  Place  the  disc  correctly  inside  the  guide  on  the 

disc tray.

•  The disc is dirty.

•  Clean the disc.

Playback does not follow 
the course of the disc’s 
program.

• It is in the mode of repeat playback, memory 

playback, etc.

•  These operations may prevent a proper progress 

of the contents.

Buttons do not work.

•  Power supply fl uctuations or other abnormalities 

such as static electricity may interrupt correct 
operations.

•  Press and hold the ON/STANDBY button on the 

front panel for more than about 3 seconds. The 
DVD player turns off. Press the button again to turn 
it on. If the buttons still do not work, disconnect 
the power plug and insert it into the wall outlet 
again.

The remote control does not 
work properly.

•  The remote control is not pointed at the remote 

sensor of the DVD player.

•  Point the remote control at the remote sensor of 

the DVD player.

• The remote control is too far from the DVD 

player.

•  Operate the remote control within about 7 m.

• The batteries in the remote control are 

exhausted.

•  Replace the batteries with new ones.