Toshiba xd-e600 ユーザーガイド

Basic playback

 To turn the power off

Press ON/STANDBY to turn the unit off.

Notes
• Do not move the DVD player during playback. Doing so may 

damage the disc.

• Use the OPEN/CLOSE button to open and close the disc tray. 

Do not push the disc tray while it is moving. Doing so may cause 
the DVD player to malfunction.

• Do not push up on the disc tray or put any objects other than 

discs on the disc tray. Doing so may cause the DVD player to 
malfunction.

•  In many instances, a menu screen will appear after playback of 

a movie is completed.  Prolonged display of an on-screen menu 
may damage your television set, permanently etching that image 
onto its screen. To avoid this, be sure to press the STOP button 
on your remote control once the movie is completed.

This section shows you the basics on how to play a disc.

CAUTION
Keep your fi ngers well clear of the disc tray as it is closing. 
Neglecting to do so may cause serious personal injury.

Preparations
• When you want to view a disc, turn on the TV and select the 

video input connected to the DVD player.

• When you want to enjoy the sound of discs from the audio 

system, turn on the audio system and select the input 
connected to the DVD player.

Notes
•  If the disc tray is holding a disc you have already played, playback 

will begin from the location where you last stopped. For resuming 
playback, see  

.

• Some video CD are recorded with PBC (Playback Control), a 

menu with recorded contents may appear on the TV if you have 
turned the PBC on. You can make your selection according to 
its PBC menu. Press the PBC button on the remote control to 
turn PBC on or off anytime during Video CD playback. When 
switching from PBC off to PBC on mode, playback will start from 
the beginning of the disc. To turn on the menu display again, press 
the RETURN button.

 To pause playback (still mode)

Press PAUSE/STEP during playback.

To resume normal playback, press the 
PLAY button.
• The sound is muted during still 

mode.

 To stop playback

Press STOP.

 To remove the disc

Press OPEN/CLOSE.

Remove the disc after the disc tray 
opens completely.

 To start playback in the stop mode

Press PLAY.

  To obtain a higher quality picture 

Occasionally, some picture noise not usually visible during 
a normal broadcast may appear on the TV screen while 
playing a DVD because the high resolution pictures on 
these discs include a lot of information. While the amount 
of noise depends on the TV you use with this DVD player, 
you should generally reduce the sharpness adjustment on 
your TV when viewing DVDs.

If you insert a DVD that contains a top menu, a 
menu may appear. Use   /   /   /    to select the 
title you want to view, then press ENTER to start 
playback.

• You may need to press the TOP MENU or MENU 

button to display disc menu (depending on the actual 
DVD.) 

The DVD player turns on.

The disc tray opens.

With the playback 
side down

• There are two different disc sizes. Place the disc in 

the correct guide on the disc tray. If the disc is out 
of the guide, it may damage the disc and cause the 
DVD player to malfunction.

• Do not place a disc which is unplayable in this DVD 

player.

Playback starts.

ON/STANDBY

Be sure to press the OPEN/CLOSE 
button to close the disc tray after you 
remove the disc.

 

If the DVD player is stopped, or the screen saver is 
engaged for approximately 20 minutes, the DVD player 
will automatically turn itself off.