Toshiba tdp-sp1u ユーザーガイド

27

The placement angle and the height of the projected image can be adjusted by the foot 
adjuster.

j

The foot adjuster extends. Release the but-
ton to lock the position.

k

To stow the foot adjuster, hold up the projector 
while pressing the foot adjuster release button, 
then slowly lower the projector.

j

k

The speaker volume can be adjusted when an audio signal is being input. 

•  A lamp characteristics may rarely cause the brightness to fluctuate slightly.

•  A lamp is consumable item. If used for extended periods, images will appear dark, and

the lamp could burn out.  This is characteristic of a lamp, and is not malfunction. (The 

lifetime of the lamp depends on conditions of use.)

•  The DLP

®

 chip is made using extremely advanced technology. There may be black spots 

(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. These 

are intrinsic characteristics of the technology and are not malfunctions. 

•  Although this projector supports a wide range of RGB signals

, any resolutions not 

supported by this projector (SVGA) will be expanded or shrunk, which will affect image 

quality slightly. To view high-quality images, set the computer’s external output to SVGA.

•  With some models of computer having LCD displays or the like, displaying images

simultaneously on the projector and the monitor’s display may prevent the images from 

displaying properly. If this happens, turn off the computer’s LCD display. For information 

on how to turn off the LCD display, see the computer’s owner’s manual.

•  If no signal is being input from the connected equipment or signal input is stopped while

projecting, the 

“No signal” message will appear.

•  If a signal not supported by the projector is input, the

“Unsupported signal” message 

will appear.

•  If an unavailable operation button is pressed, the

 icon will appear.

2

1

2

1