Contax nx 取り扱いマニュアル
The position dial may be set at any
one of five positions - “
one of five positions - “
” (white),
“
” (green), “SET”,
“ISO”, or “CF”.
<1. Photography>
The “
” (white) and “
” (green) settings are for photography.
“
” (white): Stores the current photography mode (focus, exposure, metering,
drive) in memory. When the main switch is set to ON, the camera
begins operation in the previously set mode.
begins operation in the previously set mode.
“
” (green): The same combination of photography modes (focus, exposure,
metering, drive) is selected each time the main switch is set to
ON.
ON.
When shipped from the factory the modes are focusing mode “
”, exposure mode
“
”, metering mode “
”, and drive mode “
”.
The details of each mode may be altered as necessary (page 31, 37).
<2. SET>
Setting details for “
” (green).
<3. ISO>
Checking film speed, and setting film speed manually.
<4. CF>
Setting “
” (Custom Functions) (page 86).
The F dial (front command dial) and R dial (rear command dial) are used for a
variety of settings.
variety of settings.
F dial (front command dial)
• Exposure correction settings
• Selecting the photography mode
• Exposure correction settings
• Selecting the photography mode
(focusing mode, exposure mode,
metering mode, drive mode).
metering mode, drive mode).
• ABC settings
• Internal flash metering correction
• “
• Internal flash metering correction
• “
” Custom function settings
R dial (rear command dial)
• Shutter speed settings
• Selecting the photography mode
• Shutter speed settings
• Selecting the photography mode
(focusing mode, exposure mode,
metering mode, drive mode).
metering mode, drive mode).
• Film speed settings
• “
• “
” Custom function settings
29
28
3. Position dial
4. F and R dials
R dial
F dial
Position dial
05-1BC(E)_P025-034 11/15/01 7:27 PM Page 28