Netgear fr314 参照ガイド
Reference Guide for the Model FR314, FR318 and FV318 Cable/DSL Firewall and VPN Routers
General Configuration
5-5
The LAN Subnet Mask defines the range of IP addresses that are on the LAN. The default
Class C subnet mask of 255.255.255.0 supports up to 254 IP addresses on the LAN. If the
Class C subnet mask is used, all local area network addresses should contain the same first
three numbers as the firewall router’s LAN IP Address (for example,
Class C subnet mask of 255.255.255.0 supports up to 254 IP addresses on the LAN. If the
Class C subnet mask is used, all local area network addresses should contain the same first
three numbers as the firewall router’s LAN IP Address (for example,
192.168.0
). Unless you
have a need to change it, NETGEAR recommends that you use the default subnet mask of
255.255.255.0
.
WAN Settings
The WAN Settings options are:
•
WAN Gateway (Router) Address
The WAN Gateway (Router) Address is the IP address of the next router or gateway to which
your firewall router connects to access the Internet. In cable and DSL environments, the WAN
router is located at the ISP. The Gateway (Router) Address is automatically assigned when
Dynamic Addressing or PPPoE is selected as your addressing mode.
your firewall router connects to access the Internet. In cable and DSL environments, the WAN
router is located at the ISP. The Gateway (Router) Address is automatically assigned when
Dynamic Addressing or PPPoE is selected as your addressing mode.
•
NETGEAR Firewall WAN IP Address
This is the IP Address assigned to the WAN port of the firewall router. When NAT is enabled,
this will be the only address seen by Internet users, and all activity on the Internet will appear
to originate from this address. The WAN IP address is assigned automatically when Dynamic
Addressing or PPPoE is selected as your addressing mode. The WAN IP Address is the same
as the LAN IP Address when NAT Disabled mode is selected.
this will be the only address seen by Internet users, and all activity on the Internet will appear
to originate from this address. The WAN IP address is assigned automatically when Dynamic
Addressing or PPPoE is selected as your addressing mode. The WAN IP Address is the same
as the LAN IP Address when NAT Disabled mode is selected.
•
WAN Subnet Mask
The WAN Subnet Mask determines which IP addresses are located on the WAN. This subnet
mask should be assigned by your ISP.
mask should be assigned by your ISP.
The WAN Subnet Mask is assigned automatically when Dynamic Addressing or PPPoE is
selected as your addressing mode. The WAN Subnet Mask is the same as the LAN Subnet
Mask when NAT Disabled mode is selected.
selected as your addressing mode. The WAN Subnet Mask is the same as the LAN Subnet
Mask when NAT Disabled mode is selected.
DNS Settings
There is one DNS Settings option: DNS Servers.