Netgear FVL328 参照マニュアル

Managing Your Network

7-9

6.

The IP Address to connect to this device is used to manage this router via the Internet. You 
need its public IP Address, as seen from the Internet. This public IP Address is allocated by 
your ISP, and is shown here. But if your ISP account uses a Dynamic IP Address, the address 
can change each time you connect to your ISP. There are 2 solutions to this problem: 

a.

Have your ISP allocate you a Fixed IP address. 

b.

Use the DDNS (Dynamic DNS) feature so you can connect using a domain name, rather 
than an IP address. 

7.

Click Apply to have your changes take effect.

When accessing your router from the Internet, the Secure Sockets Layer (SSL) will be enabled. 
You will enter https:// and type your router's WAN IP address into your browser's Address (in IE) 
or Location (in Netscape) box, followed by a colon (:) and the custom port number. For example, if 
your external address is 134.177.0.123 and you use port number 8080, enter in your browser:

https://134.177.0.123:8080

 
Note: When you remotely connect to the FVL with a browser via SSL, you may get a message 
regarding the SSL certificate. If you are using a Windows computer with Internet Explorer 5.5 
or higher, simply click Yes to accept the certificate.

Tip: If you are using a dynamic DNS service such as TZO, you can always identify the IP 
address of your FVL328 by running 

TRACERT

 from the Windows Start menu Run option. For 

example, 

t and you will see the IP address your ISP has 

currently assigned to the FVL328.

From the main menu, under Maintenance, select Router Status to view the screen in 

below.