Netgear FVL328 参照マニュアル
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
8-8
Troubleshooting
May 2004, 202-10030-02
1.
Press and hold the Default Reset button until the Test LED turns on (about 10 seconds).
2.
Release the Default Reset button and wait for the firewall to reboot.
Problems with Date and Time
The E-mail menu in the Security section displays the current date and time of day. The FVL328
Firewall uses the Network Time Protocol (NTP) to obtain the current time from one of several
Network Time Servers on the Internet. Each entry in the log is stamped with the date and time of
day. Problems with the date and time function can include:
Firewall uses the Network Time Protocol (NTP) to obtain the current time from one of several
Network Time Servers on the Internet. Each entry in the log is stamped with the date and time of
day. Problems with the date and time function can include:
•
Date shown is January 1, 2000.
Cause: The firewall has not yet successfully reached a Network Time Server. Check that your
Internet access settings are configured correctly. If you have just completed configuring the
firewall, wait at least five minutes and check the date and time again.
Internet access settings are configured correctly. If you have just completed configuring the
firewall, wait at least five minutes and check the date and time again.
•
Time is off by one hour.
Cause: The firewall does not automatically sense Daylight Savings Time. In the Schedule
menu, select or clear the check box marked Adjust for Daylight Savings Time.
menu, select or clear the check box marked Adjust for Daylight Savings Time.