Netgear FVL328 参照マニュアル
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
5-14
Protecting Your Network
May 2004, 202-10030-02
To block keywords or Internet domains based on a schedule, select Every Day or select one or
more days. If you want to limit access completely for the selected days, select All Day. Otherwise,
If you want to limit access during certain times for the selected days, type a Start Time and an End
Time.
more days. If you want to limit access completely for the selected days, select All Day. Otherwise,
If you want to limit access during certain times for the selected days, type a Start Time and an End
Time.
Note:
Enter the values in 24-hour time format. For example, 10:30 am would be 10 hours and 30
minutes and 10:30 pm would be 22 hours and 30 minutes.
Be sure to click Apply when you have finished configuring this menu.
Setting the Time Zone
The FVL328 Firewall uses the Network Time Protocol (NTP) to obtain the current time and date
from one of several Network Time Servers on the Internet. In order to localize the time for your
log entries, you must specify your Time Zone:
from one of several Network Time Servers on the Internet. In order to localize the time for your
log entries, you must specify your Time Zone:
•
Time Zone. Select your local time zone. This setting will be used for the blocking schedule
and for time-stamping log entries. At power-up, the clock is set to Saturday 01/01/2001
00:00:00.
and for time-stamping log entries. At power-up, the clock is set to Saturday 01/01/2001
00:00:00.
•
Automatically Adjust for Daylight Savings Time. Select this check box for automatic daylight
savings time.
savings time.
Note: If supported for your region, you can check Automatically adjust for Daylight Savings
Time. If this is not supported, you must manually adjust the time to allow for Daylight Saving.
Time. If this is not supported, you must manually adjust the time to allow for Daylight Saving.
Be sure to click Apply when you have finished configuring this menu.
Set Clock
Use this to set a particular Date/Time to the RTC (Real-Time Clock). This is only useful if NTP
(below) is not being used. Otherwise, your setting will be lost on the next synchronization with the
NTP Server.
(below) is not being used. Otherwise, your setting will be lost on the next synchronization with the
NTP Server.
Enable NTP (Network Time Protocol)
If enabled, the RTC is updated regularly by contacting a NTP Server on the Internet. The fixed
NTP query interval is 2 hours.
NTP query interval is 2 hours.