Netgear FVL328 参照マニュアル

ページ / 234
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
Virtual Private Networking
6-9
May 2004, 202-10030-02
VPN Policy Configuration for Manual Key Exchange
With Manual Key Management, you will not use an IKE policy. You must manually type in all the 
required key information. Click the VPN Policies link from the VPN section of the main menu to 
display the menu shown below.
Encapsulated Security 
Payload (ESP) 
 
Configuration
ESP provides security for the payload (data) sent through the VPN tunnel. 
Generally, you will want to enable both Encryption and Authentication. Two ESP 
modes are available: 
Plain ESP encryption or ESP encryption with authentication
These settings must match the remote VPN endpoint.
Enable Encryption
Use this check box to enable or disable ESP Encryption.
Encryption 
 
Algorithm
If you enable ESP encryption, then select the encryption algorithm:
DES – the default, or 3DES - more secure
Enable Authentication
Use this check box to enable or disable ESP transform for this VPN policy. 
Authentication 
 
Algorithm
If you enable AH, then use this menu to select which authentication algorithm 
will be employed. The choices are:
MD5 – the default, or SHA1 – more secure
NetBIOS Enable
Check this if you want NetBIOS traffic to be forwarded over the VPN tunnel. 
The NetBIOS protocol is used by Microsoft Networking for such features as 
Network Neighborhood.
Table 6-1.
VPN Auto Policy Configuration Fields
Field 
Description