Netgear FVS336G 参照ガイド

8-10

Router and Network Management

5. (Optional) To change the idle timeout for an administrator login session, enter a new number 

of minutes in the Idle Timeout field. 

6. Click Apply to save your settings or Reset to return to your previous settings. 

Using the Remote Management page, you can allow an administrator on the Internet to configure, 
upgrade, and check the status of your VPN firewall. You must be logged in locally to enable 
remote management (see 

).  

To configure your firewall for Remote Management:

1. Select Administration > Remote Management from the main menu The Remote 

Management screen is displayed.

Note: If the administrator login timeout value is too large, you may have to wait a 

long time before you are able to log back into the VPN firewall if your 
previous login was disrupted (for example, if you did not click Logout on the 
Main Menu bar to log out).

Note: After a factory default reset, the password and timeout value will be changed 

back to password and 5 minutes, respectively.

Note: Be sure to change the default configuration password of the firewall to a very 

secure password. The ideal password should contain no dictionary words from any 
language, and should be a mixture of letters (both upper and lower case), numbers, 
and symbols. Your password can be up to 30 characters. See 

 for the procedure on how to do this.