Netgear FVS336G 参照ガイド
A-1
v1.0, October 2007
Appendix A
Default Settings and Technical Specifications
You can use the reset button located on the rear panel to reset all settings to their factory defaults.
This is called a hard reset.
This is called a hard reset.
•
To perform a hard reset, press and hold the reset button for approximately 10 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
Table A-1
below.
•
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. VPN firewall Default Configuration Settings
Feature
Default Behavior
Router Login
User Login URL
https://192.168.1.1
User Name (case sensitive)
admin
Login Password (case sensitive)
password
Internet Connection
WAN MAC Address
Use Default address
WAN MTU Size
1500
Port Speed
AutoSense
Local Network (LAN)
Lan IP Address
192.168.1.1
Subnet Mask
255.255.255.0
RIP Direction
None
RIP Version
Disabled
RIP Authentication
Disabled
DHCP Server
Enabled
DHCP Starting IP Address
192.168.1.2
DHCP Ending IP Address
192.168.1.100
Management