Netgear FVS336G 参照ガイド

Introduction

1-7

The rear panel of the ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN includes 
Gigabit Ethernet LAN and WAN connections, a cable lock receptacle, power and reset switches, 
and an AC power connection.

Viewed from left to right, the rear panel contains the following elements:

1. Factory Defaults button.

Using a sharp object, press and hold this button for about ten seconds until the front panel 
TEST light flashes to reset the VPN firewall to factory default settings. All configuration 
settings will be lost and the default password will be restored.

2. LAN Ethernet ports.

Four switched N-way automatic speed negotiating, Auto MDI/MDIX, Gigabit Ethernet ports 
with RJ-45 connectors. 

LINK/ACT
(Link and 
Activity)

On (Green)
Blinking (Green)
Off

The WAN port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the WAN port.
The WAN port has no link.

LAN Ports

SPEED

On (Green)
On (Amber)
Off

The LAN port is operating at 1,000 Mbps.
The LAN port is operating at 100 Mbps.
The LAN port is operating at 10 Mbps.

LINK/ACT
(Link and 
Activity)

On (Green)
Blinking (Green)
Off

The WAN port has detected a link with a connected Ethernet device.
Data is being transmitted or received by the WAN port.
The WAN port has no link.