Netgear FVS336G 参照ガイド
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
5-8
Virtual Private Networking Using IPsec
v1.0, October 2007
Creating a VPN Tunnel Connection to a VPN Client
You can set up multiple remote VPN Client policies through the VPN Wizard by changing the
default End Point Information settings created for each policy by the wizard. A remote client
policy can support up to 200 clients. The remote clients must configure the “Local Identity” field
in their policy as “PolicyName<X>.fvs_remote.com”, where X stands for a number from 1 to 25.
default End Point Information settings created for each policy by the wizard. A remote client
policy can support up to 200 clients. The remote clients must configure the “Local Identity” field
in their policy as “PolicyName<X>.fvs_remote.com”, where X stands for a number from 1 to 25.
As an example, if the client-type policy on the VPN firewall is configured with “home” as the
policy name, and if two users are required to connect using this policy, then the “Local Identity” in
their policy should be configured as “home1.fvs_remote.com” and “home2.fvs_remote.com,”
respectively.
policy name, and if two users are required to connect using this policy, then the “Local Identity” in
their policy should be configured as “home1.fvs_remote.com” and “home2.fvs_remote.com,”
respectively.
To configure the VPN client:
1. Select VPN > VPN Wizard from the main menu. The VPN Wizard screen is displayed
Figure 5-6