Netgear HR314 参照マニュアル
Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
5-6
Wireless
•
Open System
Open System (no authentication or encryption
•
Shared Key (default)
If “Shared Key” is selected, you need to enable the WEP and enter at least one shared key.
If “Shared Key” is selected, you need to enable the WEP and enter at least one shared key.
For easy installation, Open System is the default. However, NETGEAR strongly
recommends that you change to Shared Key.
recommends that you change to Shared Key.
WEP and Encrypion Keys
Enable or Disable the Wired Equivalent Privacy. If WEP is enabled, you can manually or
automatically program the four data encryption keys.
automatically program the four data encryption keys.
•
Manual - Type the keys as hexadecimal digits (any combination of 0-9, a-f, or A-F)
•
Automatic - Enter a word or group of printable characters in the Passphrase box and click the
Generate Keys button.
Generate Keys button.
•
Shared Key (1-4)
Specifies the shared key value in hexadecimal format based on the key size selected: 64 bits,
128 bits, or 152 bits. Default Key Size: 64 bits
Specifies the shared key value in hexadecimal format based on the key size selected: 64 bits,
128 bits, or 152 bits. Default Key Size: 64 bits
•
Default Shared Key
Specifies the preferred share key entry from 1 to 4. Default: 1
Specifies the preferred share key entry from 1 to 4. Default: 1
Note:
You must configure all PCs and Access Points in your network with the same KEY values
to communicate.